Guide for pros · Pricing and quoting
How to turn your hourly rate into a per-minute quote
By The Microployed teamUpdated 3 min read
The short answer
Divide your hourly rate by 60 to get your per-minute rate, estimate the minutes the job needs, then add a buffer of 15% to 30% for setup, testing and the handoff note. At $90 an hour that's $1.50 a minute, so a 20 minute fix with a 25% buffer is quoted at 25 minutes, or $37.50.
The steps, about 5 minutes
Step 1: Divide your hourly rate by 60
That's your per-minute rate. $60 an hour is $1.00 a minute, and $120 an hour is $2.00 a minute.
Step 2: Estimate the working minutes
Think about the actual work, not the whole job: the edit, the fix or the review itself.
Step 3: Add a buffer for the overhead
Multiply the working minutes by 1.15 to 1.3 to cover reading the brief, logging in, testing and writing the handoff note.
Step 4: Multiply and apply your floor
Multiply the buffered minutes by your per-minute rate, then round up to your minimum if the result comes in below it.
Why small jobs need their own pricing
An hourly rate works well for projects, but it breaks down on a 15 minute job. Round up to a full hour and the client feels overcharged for a small fix. Bill only the minutes you spent editing and you quietly lose the time it took to read the brief, log in, find the right file, test your change and write a note about what you did. On a two day project that overhead disappears into the total, but on a 20 minute job it can be half the work.
Pricing by the minute solves both problems, as long as the quote includes that overhead from the start.
The formula, with examples at four rates
Your per-minute rate is your hourly rate divided by 60. Your quote is that rate multiplied by the working minutes plus a buffer. The table below uses a 20% buffer, which suits most jobs under an hour.
| Hourly rate | Per minute | 15 minute job | 30 minute job | 60 minute job |
|---|---|---|---|---|
| $60 | $1.00 | $18.00 | $36.00 | $72.00 |
| $75 | $1.25 | $22.50 | $45.00 | $90.00 |
| $90 | $1.50 | $27.00 | $54.00 | $108.00 |
| $120 | $2.00 | $36.00 | $72.00 | $144.00 |
You can plug in your own numbers with our per-minute quote calculator, which also shows what a platform fee would take off each quote.
How to estimate minutes honestly
Most freelancers underestimate small jobs because they picture only the satisfying part, the fix itself. A better way is to look back at your last ten small jobs and split each one into four parts: getting oriented (reading the brief, getting access, finding the file), doing the work, checking the work, and handing it off. You'll usually find that the work itself is between half and three quarters of the total.
If you don't have that history yet, start tracking it now with any timer. Two weeks of honest numbers will make your quotes far more accurate than any rule of thumb.
Choosing the size of your buffer
A buffer of 15% suits jobs you've done many times on platforms you know well, such as resizing a set of images or fixing a familiar tag. Use 25% to 30% for work on an unfamiliar setup, jobs that depend on someone else's access, or anything that needs a test purchase or a deploy to confirm. If a particular kind of job keeps running over, raise the buffer for that kind of job rather than raising your hourly rate across the board.
Setting a floor for tiny jobs
Even a two minute text change needs a login and a check, so set a minimum charge that covers the overhead. A 15 minute floor works for many freelancers. At $90 an hour that's $22.50, which is fair to the client and keeps tiny requests worth your time. Put the floor in your profile or your quote so it never comes as a surprise.
When the job turns out bigger than it looked
The quote only works if you protect it. As soon as you notice that a job needs more than you estimated, stop and tell the client before you go over. Say what you found, how much more time it needs, and what the new total would be. Most clients appreciate the warning, and the ones who don't would have disputed the bill anyway.
Get small jobs without writing proposals
Microployed sends small jobs in your skill when you turn on availability. There are no proposals to write, and you keep 100% of your quote. Joining is free while we're in beta.
Join free as a proThe next level up
Get small jobs at your rate without writing proposals
Once your per-minute quote is set, the slow part of small work is finding it. On Microployed you turn on your availability and get matched to small jobs in your skill, with no proposals or discovery calls, and you keep 100% of your quote.
Join free as a proQuestions people ask
Should I charge less per minute for small jobs?
No. Small jobs carry more overhead per minute of real work, so your per-minute rate should match your hourly rate at least, and your buffer covers the extra setup.
What if I finish faster than I quoted?
If you quoted a fixed price, keep it, because the buffer exists for the jobs that run long. If you bill by the minute, bill the minutes you actually worked.
What's a sensible minimum charge?
Many freelancers set a 15 minute minimum. At $60 an hour that's $15, and at $120 an hour it's $30.
How do I quote a job I've never done before?
Estimate the work, then use a larger buffer of 25% to 30%, and tell the client which part of the job is uncertain so a change in scope doesn't surprise them.